常用DIN标准

• 六角头自钻自攻螺钉 DIN EN ISO 15480
• 六角头木螺钉 Din 571
• 内六角紧定螺钉—凹端 Din 916
• 内六角紧定螺钉—截锥端 Din 914
• 弹簧垫圈 DIN 128
• 十字槽圆头螺钉 DIN 7996
• 牙条 DIN 975
• 开槽盘头螺钉 DIN 85-72
• 十字槽球面圆柱头螺钉 DIN 7985-86
• 内六角紧定螺钉—导向圆柱端 Din 915
• 内六角紧定螺钉—平端 Din 913
• 六角法兰面螺母 DIN EN 1661
• 1型六角螺母—产品等级A和B级 DIN EN ISO 4032
• 方螺母—产品等级C级 DIN 557
• 六角凸缘头自钻自攻螺钉 DIN EN ISO 15480
• 十字槽盘头自钻自攻螺钉 DIN EN ISO 15481
• 平圆头方颈螺栓 DIN 603
• 圆柱头内六角螺钉 DIN EN ISO 4762
• 内六角平圆头螺钉 DIN EN ISO 7380
• 薄圆柱头内六角螺钉 DIN 6912
• 六角头螺栓—全螺纹—产品等级A和B级 DIN EN ISO 4017
• 螺杆 DIN 976-1
• 内六角沉头螺钉 DIN EN ISO 10642

所有DIN标准
螺栓
• 焊接螺栓 Weld screws with metric head
DIN 34817
• 方头凸缘螺栓 Squate head bolts with collar
DIN 478
• 平圆头方颈螺栓 Mushroom head square neck bolts
DIN 603
• 沉头带榫螺栓 Flat countersunk nib bolts
DIN 604
• 沉头高方颈螺栓 Flat countersunk square neck bolts with long square
DIN 605
• 半圆头带榫螺栓 Cup head nib bolts
DIN 607
• 沉头短方颈螺栓 Flat countersunk square neck bolts with short square
DIN 608
• 六角花形大法兰面钢制螺栓 Steel hexalobular head bolts with large flange
DIN 34801
• 六角头铰制孔用螺栓 Hexagon fit bolts
DIN 609
• M42-M160*6 六角头螺栓—产品等级B级 M42 to M160*6 hexagon head bolts - Product grade B
DIN 931-2
• 六角法兰面螺栓—小系列 Hexagon bolts with flange - Small series
DIN EN 1662
• 六角法兰面螺栓—加大系列 Hexagon bolts with flange - Heavy series
DIN EN 1665 | 代替DIN 6921|DIN 6922
• 六角头螺栓—－产品等级B级－细杆（杆径近似等于中径） Hexagon head bolts with reduced shank(shank diameter=pitch diameter)-Product grade B
DIN EN 24015
• 六角头螺栓—产品等级A和B级 Hexagon head bolts - Product grades A and B
DIN EN ISO 4014 | 代替DIN 931-1
• 六角头螺栓—产品等级C级 Hexagon head bolts - Product grade C
DIN EN ISO 4016 | 代替DIN 601
• 六角头螺栓—全螺纹—产品等级A和B级 Hexagon head screws - Product grade A and B
DIN EN ISO 4017 | 代替DIN 933
• 六角头螺栓—全螺纹—产品等级C级 Hexagon head screws - Product grade C
DIN EN ISO 4018 | 代替DIN 558
• 六角头螺栓—细牙—全螺纹—产品等级A和B级 Hexagon head screws with metric fine pitch thread - Product grade A and B
DIN EN ISO 8676 | 代替DIN 961
• 六角头螺栓—细牙—产品等级A和B级 Hexagon head bolts with fine pitch thread - Product grades A and B
DIN EN ISO 8765 | 代替DIN 960
• 钢结构用—大六角头高强度螺栓 High-strength hexagon head bolts with large widths across flats for structural steel bolting
DIN 6914
• 短螺纹端的六角头铰制孔用螺栓
DIN 610-84
• 粗杆六角头螺栓 重量
DIN 931-87(3)
• Clevis pins
DIN 1445
• Plain washers for metric bolts,screws and nuts .for general purposes General plan
DIN EN ISO 887
• Hexagon head bolts with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8765
• Thread run-outs and thread undercuts for ISO metric threads as in IND 13-1
DIN 76-1
• Thread run-outs and thread undercuts
DIN 76
• Bolt end protrusions
DIN 78
• Diameters of counterbores(holes)
DIN 974
• Split pin holes and wire holes in bolts,screws and studs
DIN 34803
• Bolts,screws,studs and nuts
DIN EN 20225
• Clearance holes for bolts and screws
DIN EN 20273
• T形头螺栓 ISO general purpose metric screw threads. General plan
DIN ISO 261
• 一般用途螺栓和螺钉.米制系列.端头半径 General purpose bolts and screws-metric series
DIN ISO 885
• T型螺栓
188
• T型螺栓
186
螺钉
• 方头短圆柱端紧定螺钉 Square head bolts with short dog point
DIN 479
• 方头短圆柱球面端紧定螺钉 Square head bolts with collar and oval half dog point
DIN 480
• 开槽圆柱头螺钉—产品等级A级 Slotted cheese head screws-Product grade A
DIN EN ISO 1207 | 代替DIN 84
• 开槽沉头螺钉（通用头型）－产品等级A级 Slotted pan head screws-Product grade A
DIN EN ISO 1580 | 代替DIN 85
• 开槽沉头螺钉（通用头型）－产品等级A级 Slotted countersunk flat head screws(common head style)
DIN EN ISO 2009 | 代替DIN 963
• 开槽半沉头螺钉（通用头型）－产品等级A级 Countersunk slotted raised head screws(common head style)-Produce grade A
DIN EN ISO 2010 | 代替DIN 964
• 十字槽盘头凸缘螺钉— 产品等级A级 Product grade A cross recessed pan head screws with collar
DIN 967
• 十字槽沉头（通用头型）螺钉－产品等级A级－第2部分：性能等级 钢 8.8级、不锈钢和有色金属 Cross recessed countersunk flat head screws (common head style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metals
DIN EN ISO 7046-2 | 代替DIN 965
• 开槽盘头螺钉
DIN 85-72
• 开槽十字孔螺钉
DIN 404-86
• 开槽小盘头螺钉
DIN 920-86
• 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482
• 十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head drilling screws with tapping screw thread
DIN EN ISO 15483
• 内六角紧定螺钉—平端 Hexagon socket set screws with flat point
Din 913
• 内六角紧定螺钉—截锥端 Hexagon socket set screws with cone point
Din 914
• 内六角紧定螺钉—导向圆柱端 Hexagon socket set screws with dog point
Din 915
• 内六角紧定螺钉—凹端 Hexagon socket set screws with cup point
Din 916
• 十字槽圆头螺钉 Cross recessed round head screws
DIN 7996
• 十字槽沉头自攻螺钉（通用头型） Cross recessed countersunk (flat) head tapping screws(common head style)
ISO 7050 | 代替DIN 7982
• 十字槽半沉头自攻螺钉 Cross recessed raised countersunk (oval) head tapping screws
ISO 7051 | 代替DIN 7983
• 小六角头长圆柱导向端紧定螺钉 Hexagon set screws with small hexangon and full dog point
DIN 561
• 小六角头短圆柱导向锥端紧定螺钉 Hexagon set screws with samll hexagon,half dog point and flat cone point
DIN 564
• 钢结构用—大六角头高强度螺栓和六角螺母连接副 Steel hexagon fit bolts for structural steel bolting for supply with hexagon nuts
DIN 7968
• 钢结构用—六角头螺栓和六角螺母连接副 Steel hexagon head bolts for structural steel bolting for supply with hexagon nuts
DIN 7990
• 十字槽半沉头（通用头型）螺钉－产品等级A级 Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A
DIN EN ISO 7047 | 代替DIN 966
• 十字槽圆柱头螺钉 Cross recessed cheese head screws
DIN EN ISO 7048
• 滚花指旋螺钉
DIN 464-86
• 滚花薄头指旋螺钉
DIN 653-80
• 带螺杆的六角头螺钉
DIN 7964-77
• 开槽大盘头螺钉
DIN 921-86
• 十字槽球面圆柱头螺钉
DIN 7985-86
• Designation system for fasteners
DIN 962
• Plastic washers. Standard series
DIN 34815
• Slotted set screws with flat point
DIN EN 24766
• Slotted set screws with cone point
DIN EN 27434
• Slotted set screws with long dog point
DIN EN 27435
• Slotted set screws with cup point
DIN EN 27436
• Slotted cheese head screws
DIN EN ISO 1207
• Slotted pan head screws
DIN EN ISO 1580
• Slotted countersunk flat head screws (common head style)
DIN EN ISO 2009
• Countersunk slotted raised head screws(common head style)
DIN EN ISO 2010
• Slotted headless screws with shand
DIN EN ISO 2342
• Hexagon head screws(Product grade A and B)
DIN EN ISO 4017
• Hexagon head screws(Product grade C)
DIN EN ISO 4018
• Hexagon socket set screws with flat point
DIN EN ISO 4026
• Hexagon socket set screws with cone point
DIN EN ISO 4027
• Hexagon socket set screws with dog point
DIN EN ISO 4028
• Hexagon socket set screws with cup point
DIN EN ISO 4029
• Hexagon socket head cap screws
DIN EN ISO 4762
• Pan head screws with H or type Z cross recess(Product grade A)
DIN EN ISO 7045
• Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A)
DIN EN ISO 7046-1
• Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A)
DIN EN ISO 7047
• Countersunk flat head screws
DIN EN ISO 7048
• Hexagon socket button head screws
DIN EN ISO 7380
• Hexagon head screws with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8676
• Tapping screw and washer assemblies with plain washers
DIN EN ISO 10510
• Hexagon socket countersunk head screws
DIN EN ISO 10642
• Hexalobular socket head cap screws
DIN EN ISO 14579
• Hexalobular socket cheese head screws
DIN EN ISO 14580
• Hexalobular socket pan head screws
DIN EN ISO 14583
• Hexalobular socket raised countersunk head screws
DIN EN ISO 14584
• Scres and washer assemblies with plain washers(Washer hardness classes 200 HV and 300 HV)
DIN EN ISO 10644
• Hexalobular socket pan head tapping screws
DIN EN ISO 14585
• Hexalobular socket countersunk head
DIN EN ISO 14586
• Hexalobular socket raised countersunk(oval)head tapping screws
DIN EN ISO 14587
• Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480
• Cross recessed pan head drilling screws with tapping screw thread
DIN EN ISO 15481
• Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482
• Cross recessed raisedcountersunk head drilling screws with tapping screw thread
DIN EN ISO 15483
• Countersinks. For countersunk head screws
DIN 66
• Countersinks. For countersunk head screws
DIN 74
• Screw threads
DIN 202
• Thread rolling screws
DIN 7500
• Tapping screw connections
DIN 7975
• Threads and thread ends
DIN 7998
• Wire thread inserts for ISO metric screw threads
DIN 8140-1
• Countersunk head screws
DIN EN 27721
• Tapping screw threads
DIN EN ISO 1478
• 十字槽螺丝 Cross recesses for screws
DIN EN ISO 4757
• 螺栓和螺钉用内板拧的六角花形 Hexalobular internal driving feature for bolts and screws
DIN EN ISO 10664
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965-2
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965-3
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965-4
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965-5
内六角螺钉
• 内六角沉头螺钉 Hexagon socket countersunk head screws
DIN EN ISO 10642 | 代替DIN 7991
• 薄圆柱头内六角螺钉 Hexagon socket thin head cap screws
DIN 7984
• 圆柱头内六角螺钉 Hexagon socket head cap screws
DIN EN ISO 4762 | 代替DIN 912
• 内六角平圆头螺钉 Hexagon socket button head screws
DIN EN ISO 7380
• 圆柱头内六角花形钢制螺钉 Steel hexalobular head cap screws with large driving feature
DIN 34802
• 薄圆柱头内六角螺钉 Hexagon socket thin head cap screws with pilot recess for wrench key
DIN 6912
• 六角花形小法兰面钢制螺栓 Steel hexalobular head bolts with small flange
DIN 34800
自攻螺钉
• 六角头自钻自攻螺钉 Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480 | 代替DIN 7504
• 六角凸缘头自钻自攻螺钉 Hexagon washer head drilling screws with tapping screws thread
DIN EN ISO 15480
• 十字槽盘头自钻自攻螺钉 Cross recessed pan head drilling screws with tapping screw thread
DIN EN ISO 15481
• 十字槽盘头自钻自攻螺钉 Cross recessed pan head drlling screws with tapping screw thread
DIN EN ISO 15481 | 代替DIN 7504
• 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482 | 代替DIN 7504
• 十字槽半沉头自钻自攻螺钉 Cross recessed raised counterunk head drilling screws with tapping screw thread
DIN EN ISO 15483 | 代替DIN 7504
• 自钻自攻螺钉 Drilling screws with tapping screw thread
DIN EN ISO 10666 | 代替DIN 7504
• 六角头和开槽头三角牙螺钉—尺寸、技术要求及试验 Hexagon head and slotted head thread cutting screws - Dimensions,requirements and testing
DIN 7513
• 十字槽螺纹滚成自攻螺钉—尺寸、技术要求及试验 Cross recessed head thread cutting screws - Dimensions,requirements and testing
DIN 7516
• 米制螺纹滚成自攻螺钉—型式、名称及技术要求 ISO metric thread rolling screws - Types,designation and requirements
DIN 7500-1
• 米制螺纹滚成自攻螺钉—预制孔直径尺寸方案 Tread rolling screws for ISO metric thread - Guideline values for hole diameters
DIN 7500-2
• 紧固件供货技术条件—米制螺纹—性能等级为10.9级的螺纹滚成自攻螺钉 Technical delivery conditions for fasteners - Metric thread rolling screws of property class 10.9
DIN 267-30
• 十字槽盘头凸缘自攻螺钉 Cross recessed pan head tapping screws with collar
DIN 968
• 六角凸缘自攻螺钉 Hexagon washer head tapping screws
DIN 6928
• 自攻螺钉用螺纹 Tapping screw threads
DIN EN ISO 1478 | 代替DIN 7970
• 六角头自攻螺钉 Hexagon head tapping screws
ISO 1479 | 代替DIN 7976
• 开槽盘头自攻螺钉 Slotted pan head tapping screws
ISO 1481 | 代替DIN 7971
• 开槽沉头自攻螺钉（通用头型） Slotted countersunk(flat)head tapping screws(common head style)
ISO 1482 | 代替DIN 7972
• 开槽半沉头自攻螺钉（通用头型） Slotted raised countersunk (oval) head tapping screws(common head style)
ISO 1483 | 代替DIN 7973
• 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
ISO 7049 | 代替DIN 7981
木螺钉
• 开槽半沉头木螺钉 Slotted raised countersunk(oval) head wood screws
Din 95
• 开槽半圆头木螺钉 Slotted round head wood screws
Din 96
• 开槽沉头木螺钉 Slotted countersunk(flat) head wood screws
Din 97
• 六角头木螺钉 Hexagon wood screws
Din 571
• 十字沉头木螺钉 Cross recessed countersunk (flat) head wood screws
DIN 7997
螺杆和螺柱
• 牙条 Threaded rod
DIN 975
• 螺杆 Metric thread stud bolts
DIN 976-1
• 螺杆—过盈配合螺纹 Metric interference-fit thread stud bolts
DIN 976-2
• Welding studs for turnbuckles
DIN 34828
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-3
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-4
• Hexagon bolts with flange-Small series
DIN EN 1662
• Hexagon bolts with flange-Heavy series
DIN EN 1665
• Hexagon bolts with flange with metric fine pitch thread
DIN EN 14219
• High-strength structural bolting assemblies for preloading
DIN EN 14399-3
• High-strength structural bolting assemblies for preloading
DIN EN 14399-4
• Hexagon head bolts with reduced shank
DIN EN 24015
• Hexagon head bolts(Product grade A and B)
DIN EN ISO 4014
• Hexagon head bolts(Product grade C)
DIN EN ISO 4016
铆钉
• 半圆头钢铆钉—公称直径10~36mm Steel round head rivets with nominal diameters from 10 to 36 mm
DIN 124
• 沉头钢铆钉—公称直径10~36mm Steel countersunk head rivets with nominal diameters from 10 to 36 mm
DIN 302
• 半圆头铆钉—公称直径1~8mm Round head rivets with nominal diameters from 1 to 8 mm
DIN 660
• 沉头铆钉—公称直径1~8mm Countersunk head rivets with nominal diameters from 1 to 8 mm
DIN 661
• 半沉头铆钉—公称直径1.6~6mm Oval-head rivets with nominal diameters from 1,6 to 6 mm
DIN 662
• 大半圆头铆钉—公称直径1.6~6mm Mushroom head rivets with nominal diameters from 1,6 to 6 mm
DIN 674
• 沉头铆钉—公称直径3~5mm Flat countersunk head rivets with nominal diameters from 3 to 5 mm
DIN 675
• 铆钉用具 Rivet sets
DIN 6434
• 盘头半空心铆钉—公称直径1.6~10mm Semitubular pan head rives with nominal diameters from 1,6 to 10 mm
DIN 6791
• 沉头半空心铆钉—公称直径1.6~10mm Semitubular countersunk head rivets with nominal diameters from 1,6 to 10 mm
DIN 6792
• 冲制铆钉 Compression rivets
DIN 7331
• 开口型盲铆钉 Break mandrel blind rivets
DIN 7337
• 开口型和封闭型铆钉 Break and clutch lining rivets
DIN 7338
• 板料拉延管铆钉 One-piece tubular rivets drawn from strip
DIN 7339
• 管制空心铆钉 Tubular rivets made from tube
DIN 7340
• Steel round head rivets
DIN 124
• Round head rivets
DIN 660
• Countersunk head rivets
DIN 661
• Oval-head rivets
DIN 662
• Mushroom head rivets
DIN 674
• Flat countersunk head rivets
DIN 675
• Semitubular pan head rivets. With nominal diameters from 1,6 to 10mm
DIN 6791
• Compression rivets
DIN 7331
• Brake and clutch lining rivets
DIN 7338
• One-piece tubular rivets
DIN 7339
• Tubular rivets
DIN 7340
• Rivet pins
DIN 7341
• Grooved pins with countersunk head
DIN EN ISO 8747
螺母
• 非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)
DIN EN 1663 | 代替DIN 6926
• 非金属嵌件六角锁紧薄螺母 Prevailing torque type hexagon thin nuts (with non-metallic insert )
DIN EN ISO 10511 | 代替DIN 985
• 钢结构用—大六角螺母 Steel hexagon nuts with large widths across flats for high - strength structural bolting
DIN 6915
• 塑料六角螺母 Plastic hexagon nuts
DIN 34814
• 六角法兰面螺母 Hexagon nuts with flange
DIN EN 1661 | 代替DIN 6923
• 1型六角螺母—产品等级A和B级 Hexagon nuts,style 1-Product grades A and B
DIN EN ISO 4032 | 代替DIN 934
• 2型六角螺母—产品等级A和B级 Hexagon nuts,style 2-Product grades A and B
DIN EN ISO 4033
• 六角螺母—产品等级C级 Hexagon nuts - Product grade C
DIN EN ISO 4034 | 代替DIN 555
• 方螺母—产品等级C级 Product grade C square nuts
DIN 557
• 薄型方螺母—产品等级B级 Square thin nuts - Product grade B
DIN 562
• 六角薄螺母（倒角型）—产品等级A和B级 Hexagon thin nuts(chamfered)-Product grade A and B
DIN EN ISO 4035 | 代替DIN 439-2
• 六角薄螺母（无倒角型）—产品等级B级 Hexagon thin nuts - Product grade B(unchamfered)
DIN EN ISO 4036 | 代替DIN 439-1
• 1型六角螺母—细牙螺纹—产品等级A和B级 Hexagon nuts,style 1,with metric fine pitch thread - Product grades A and B
DIN EN ISO 8673 | 代替DIN 934|DIN 971-1
• 2型六角螺母—细牙螺纹—产品等级A和B级 Hexagon nuts,style 2,with metric fine pitch thread - Product grades A and B
DIN EN ISO 8674 | 代替DIN 971-2
• 六角薄螺母—细牙螺纹—产品等级A和B级 Hexagon thin nuts with metric fine pitch thread - Product grades A and B
DIN EN ISO 8675 | 代替DIN 439-2
• 六角开槽螺母—粗牙螺纹和细牙螺纹—产品等级A和B级 Hexagon slotted nuts and caltle nuts with metric coarse and fine pitch thread - Product grades A and B
DIN 935-1
• 六角开槽螺母—产品等级C级 Hexagon slotted nuts with metric coarse pitch thread - Product grade C
DIN 935-3
• 六角开槽薄螺母—产品等级A和B级 Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grade A and B
DIN 979
• 六角盖形螺母—扁球型 Hexagon cap nuts
DIN 917
• 六角盖形螺母—半圆球型 Hexagon domed cap nuts
DIN 1587
• 非金属嵌件六角组合式盖形锁紧螺母 Prevailing torque hexagon domed cap nuts with non-metallic insert
DIN 986
• 1型全金属六角锁紧螺母—性能等级5、8和10级 Prevailing torque type all-metal hexagon nuts,style 1- Property classes 5,8 and 10
DIN EN ISO 7719
• 开槽螺塞(螺纹塞） Screwed inserts(screw plugs)
DIN 7965
• 冲压自锁螺母 Self-locking counter nuts
DIN 7967
• 三角凸缘螺母—矿山用防雷防爆电气设备用 Triangular nuts for use with electrical equipment in mining
DIN 22425
• 小对边薄螺母—粗牙和细牙 Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 80705
• 全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts with flange
DIN EN 1664 | 代替DIN 6927
• 非金属嵌件六角法兰面锁紧螺母－细牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert)with metric fine pitch thread
DIN EN 1666 | 代替DIN 6926
• 全金属六角法兰面锁紧螺母－细牙 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
DIN EN 1667 | 代替DIN 6927
• 1型非金属嵌件六角锁紧螺母—性能等级5、8和10级 Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10
DIN EN ISO 7040 | 代替DIN 982|DIN 6924
• 2型全金属六角锁紧螺母—性能等级5、8、10和12级 Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5,8, 10 and 12
DIN EN ISO 7042 | 代替DIN 980|DIN 6925
• 1型非金属嵌件六角锁紧螺母—细牙—性能等级6、8和10级 Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10
DIN EN ISO 10512 | 代替DIN 982|DIN 6924
• 2型全金属六角锁紧螺母—细牙—性能等级8、10和12级 Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12
DIN EN ISO 10513 | 代替DIN 980|DIN 6925
• 焊接方螺母 Square weld nuts
DIN 928
• 焊接六角螺母 Hexagon weld nuts
DIN 929
• 焊接六角法兰面螺母 Hexagon weld nuts with flange
DIN 977
• 圆头滚花螺母 Knurled nuts with collar
DIN 466
• 圆头滚花薄螺母 Knurled nuts
DIN 467
• 厚圆头滚花螺母 Knurled nuts
DIN 6303
• 蝶形螺母—方翼 Wing nuts with edged wings
DIN 314
• 蝶形螺母—圆翼 Wing nuts with rounded wings
DIN 315
• 管螺母—螺纹符合ISO 228-1 Pipe nuts with thread as in ISO 228-1
DIN 431
• 圆螺母—端面开槽 Slotted round nuts
DIN 546
• 圆螺母—端面带孔 Round nuts with drilled holes in one face
DIN 547
• 圆螺母—恻面带孔 Round nuts with set pin holes in side
DIN 548
• 吊耳螺母 Lifting eye nuts
DIN 582
• 圆型套筒螺母—钢制 Turnbuckles made from steel tube or round steel bars
DIN 1478
• 六角套筒螺母 Hexagon turnbuckles
DIN 1479
• 套筒螺母—组合开启型 Turnbuckles,forged（open type)
DIN 1480
• 六角螺母—腰状杆螺栓连接副用 Hexagon nuts for use with bolts with waisted shank
DIN 2510-5
• 罩螺母—腰状杆螺栓连接副用 Cap nuts for use with bolts with waisted shank
DIN 2510-6
• 受力管套—腰状杆螺栓连接副用 Sleeves for use with bolts with waisted shank
DIN 2510-7
• 六角螺母—m=1.5d Hexagon nuts with a height of 1,5d
DIN 6330
• 六角凸缘螺母—m=1.5d Hexagon collar nuts with a height of 1,5d
DIN 6331
• 专用地脚螺钉用地脚螺母
DIN 798-1972
• 六角薄螺母（老标准）（产品等级A和B级）
DIN 936-1985
• 六角冕形薄螺母（原类型）
DIN 937-1987
• 六角开槽薄螺母和六角冕形薄螺母米制粗牙和细牙产品等级A和B级
DIN 979-1987
• 汽车和拖车用圆盘轮螺母螺柱定心用紧固件
DIN 74361-1982 第2部分
• 载重汽车和拖挂车的圆盘轮外部件紧固件
DIN 74361-1979 第3部分
• Wing nuts with edged wings
DIN 314
• Pipe nuts with thread as in ISO 228-1
DIN 431
• Knurled nuts with collar
DIN 466
• Short knurled nuts
DIN 467
• Slotted round nuts
DIN 546
• Round nuts with drilled holes in one face
DIN 547
• Round nuts with set pin holes in side
DIN 548
• Product grade C square nuts
DIN 557
• Square thin nuts
DIN 562
• Eyenuts for lifting purposes
DIN 582
• Hexagon cap nuts
DIN 917
• Overview of European Standards for fasteners
DIN 918
• Square weld nuts
DIN 928
• Hexagon weld nuts
DIN 929
• Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread(Product grade A and B)
DIN 935-1
• Hexagon slotted nuts with metric coarse pitch thread(Product grade C)
DIN 935-3
• Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread(Product grade A and B)
DIN 979
• Prevailing torque type hexagon domed cap nuts with non-metallic insert
DIN 986
• Hexagon domed cap nuts
DIN 1587
• Boloted connections with reduced shank hexagon nuts
DIN 2510
• Knurled nuts
DIN 6303
• Hexagon nuts with a height of 1,5 d
DIN 6330
• Hexagon nuts with collar,with a height of 1,5 d
DIN 6331
• Plastic hexagon nuts
DIN 34814
• Plastic washers. large series
DIN 34816
• Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 80705
• Hexagon nuts with flange
DIN EN 1661
• Prevailing torque type hexagon nuts with flange(with non-metallic insert)
DIN EN 1663
• Prevailing torque type all-metal hexagon nuts with flange
DIN EN 1664
• Prevailing torque type hexagon nuts with flange(with non-metallic insert),with metric fine pitch thread
DIN EN 1666
• Prevailing torque type all-metal hexagon nuts with flange,with metric fine pitch thread
DIN EN 1667
• Hexagon nuts with flange. Fine pitch thread
DIN EN 14218
• Hexagon nuts,style 1(Product grades A and B)
DIN EN ISO 4032
• Hexagon nuts,style 2(Product grades A and B)
DIN EN ISO 4033
• Hexagon nuts(Product grades C)
DIN EN ISO 4034
• Hexagon thin nuts(chamfered)(Product grades A and B)
DIN EN ISO 4035
• Hexagon thin nuts(unchamfered)(Product grades B)
DIN EN ISO 4036
• Tolerances for fasteners
DIN EN ISO 4759
• Prevailing torque type hexagon nuts(with non-metallicinsert),style 1 Property classes5,8 and 10
DIN EN ISO 7040
• Prevailing torque type hexagon nuts(with non-metallicinsert),style 2 -Property classes 5,8,10 and 12
DIN EN ISO 7042
• Hexagon nuts,style 1,with metric fine pitch thread (Product grades B)
DIN EN ISO 8673
• Hexagon nuts,style 2,with metric fine pitch thread (Product grades A and B)
DIN EN ISO 8674
• Prevailing torque type hexagon thin nuts(with non-metallic insert)
DIN EN ISO 10511
• Prevailing torque type all-metal hexagon nuts,style 1 Property classes 5,8 and 10
DIN EN ISO 7719
• Hexagon thin nuts (chamfered)with metric fine pitch thread(Product grades A and B)
DIN EN ISO 8675
• Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with metric fine pitch thread-Property classes6,8 and 10
DIN EN ISO 10512
• Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread-Property classes8,10 and 12
DIN EN ISO 10513
• Hexagon weld nuts with flange
DIN EN ISO 21670
• Bolted connections with reduced shank
DIN 2510
• 非钎焊和钎焊压合接头.管接螺母系列LL Non-soldering and soldering compression fittings - Union nuts series LL
3870-2001 | 代替DIN 3870-1985;DIN 3870-19
垫圈
• 十字槽盘头螺钉—产品等级A级 Pan head screws with type H or type Z cross recess-Product grade A
DIN EN ISO 7045 | 代替DIN 7985
• 十字槽沉头（通用头型）螺钉－产品等级A级－第1部分：性能等级 钢 4.8级 Countersunk flat head screws (common head style)with type H or type Z cross recess,product grade A-Part 1:Steel of property class 4.8
DIN EN ISO 7046-1 | 代替DIN 965
• 弹簧垫圈 (DIN 127) Helical spring lock washers,sprint steel
127
• 钢制的，普通系列平垫圈 Flat Washers, steel normal series
125B | 代替7090
• 钢制的，普通系列平垫圈 Flat Washers, steel normal series
125A
• 方垫圈—木结构用 Square washers for use in timber constructions
DIN 436
• 方孔方垫圈—木结构用 Washers with square hole for use in timber constructions
DIN 440
• 粗制平垫圈—螺栓用 Washers,coarse type,or bolts
DIN 1441
• 精制平垫圈 Washers for clamping devices
DIN 6340
• 平垫圈—带重型夹紧套螺栓用 Plain washers for bolts with heavy clamping sleeves
DIN 7349
• 塑料垫圈—标准系列 Plastic washers-Standard series
DIN 34815
• 塑料垫圈—大系列 Plastic washers-Large series
DIN 34816
• 销轴用平垫圈—产品等级A级 Plain washers for use with clevis pins-Product grade A
DIN EN 28738 | 代替DIN 1440
• 平垫圈—标准系列—产品等级A级 Plain washers-Normal series-Product grade A
DIN EN ISO 7089
• 平垫圈—倒角型—标准系列—产品等级A级 Plain washers,chamfered-Normal series-Product grade A
DIN EN ISO 7090
• 平垫圈—标准系列—产品等级C级 Plain washers-Normal series-Product grade C
DIN EN ISO 7091
• 平垫圈—小系列—产品等级A级 Plain washers-Small series-Product grade A
DIN EN ISO 7092
• 平垫圈—大系列—第一部分：产品等级A级 Plain washers-Large series-Part 1: Product grade A
DIN EN ISO 7093-1
• 平垫圈—标准系列—第3部分：产品等级C级 Plain washers-Normal series-Part 3: Product grade C
DIN EN ISO 7093-2
• 平垫圈—特大系列—产品等级C级 Plain washers-Extra large series -Product grade C
DIN EN ISO 7094
• 长单耳止动垫片 Tab washers with long tab
DIN 93
• 弹簧垫圈 Curved spring lock washers
DIN 128
• 波形弹性垫圈 Wave spring washers
DIN 137
• 外舌止动垫片 External tab washers(locking tab washers)
DIN 432
• 双耳止动垫片 Tab washers with short and long tab at right angles
DIN 463
• 安全杯—DIN84开槽圆柱头螺钉用 Safety cups for cheese head screws according to DIN 84
DIN 526
• 密封垫圈 Shim rings and supporting rings
DIN 988
• 螺栓、螺母组合件用锥形弹性垫圈 Conical spring washers for bolt/nut assemblies
DIN 6796
• 锯齿锁紧弹性垫圈 Toothed lock washers
DIN 6797
• 外锯齿锁紧垫圈 Serrated lock washers
DIN 6798
• 螺钉和垫圈组合件用波形弹性垫圈 Curved spring washers for screw and washer assemblies
DIN 6904
• 螺钉和垫圈组合件用弹簧垫圈 Spring lock washers for screw and washer assemblies
DIN 6905
• 螺钉和垫圈组合件用外锯齿锁紧垫圈 Serrated lock washers with extermal teeth for screw and washer assemblies
DIN 6907
• 螺钉和垫圈组合件用锥形弹性垫圈 Conical sring washers for screw and washer assemblies
DIN 6908
• 自攻螺钉和垫圈组合件用平垫圈—标准系列和大系列—产品等级A级 Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A
DIN EN ISO 10669
• 螺钉和垫圈组合件用平垫圈—小系列、标准系列及大系列—产品等级A级 Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A
DIN EN ISO 10673
• 槽钢用方斜垫圈 Square taper washers for use with channel sections
DIN 434
• I型工字钢用方斜垫圈 Square taper washers for use with I sections
DIN 435
• 钢结构高强度螺栓连接—圆垫圈 Round washers for high-strength structural steel bolting
DIN 6916
• 钢结构高强度螺栓连接—I型工字钢用方斜垫圈 Square taper washers for high-strength structural bolting of steel I sections
DIN 6917
• 钢结构高强度螺栓连接—槽钢用方斜垫圈 Square taper washers for high-strength structural bolting of steel channel sections
DIN 6918
• 钢结构用垫圈—产品等级C级 Washers for use in structural steelwork - Product grade C
DIN7989-1
• 钢结构用垫圈—产品等级A级 Washers for use in structural steelwork - Product grade A
DIN7989-2
• 密封垫圈 Shim rings and supporting rings
DIN 988
• 平垫圈—重型螺栓用 Plain washers for bolts with heavy clamping sleeves
DIN 7349
• Shim rings and supporting rings
DIN 988
• Plain washers. For bolts with heavy clamping sleeves
DIN 7349
• Blind rivets
DIN EN ISO 14589
• Square taper steel washers for use with channel sections
DIN 434
• Square taper steel washers for use with I sections
DIN 435
• Square washers
DIN 436
• Washers with square hole for use in timber constructions
DIN 440
• Shim rings and supporting rings
DIN 988
• Washers type coarse for bolts
DIN 1441
• Washers for clamping devices
DIN 6340
• Conical spring washers. for bolt/nut assemblies
DIN 6796
• Conical spring washers
DIN 6908
• Square taper washers. For high-strength structural bolting of steel | sections
DIN 6917
• Square taper washers. For high-strength structural bolting of steel channel sections
DIN 6918
• Plain washers. For Bolts with Heavy Clamping Sleeves
DIN 7349
• Washers for use in structural steelwork(Product grade C)
DIN 7989-1
• Washers for use in structural steelwork(Product grade A)
DIN 7989-2
• Chamfered plain washers for use in structural steelwork
DIN 34820
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-5
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-6
• Plain washers-Normal series(Product grades A)
DIN EN ISO 7089
• Plain washers,chamfered-Normal series(Product grades A)
DIN EN ISO 7090
• Plain washers-Normal series(Product grades C)
DIN EN ISO 7091
• Plain washers-Small series(Product grades A)
DIN EN ISO 7092
• Plain washers-Large series(Product grades A)
DIN EN ISO 7093-1
• Plain washers-Large series(Product grades C)
DIN EN ISO 7093-2
• Plain washers-Extra large series(Product grades C)
DIN EN ISO 7094
• Plain washers for tapping screw and washer assemblies(Product grades A)
DIN EN ISO 10669
• Plain washers for screw and washer assemblies Small,normal nad large series (Product grades A)
DIN EN ISO 10673
挡圈
• 轴用开口弹性挡圈 Lock washers (retaining washers) for shafts
DIN 6799
• 孔用挡圈—标准型和重型 Circlips (retaining rings) for bores - Normal type and heavy type
DIN 472
• 轴用挡圈—带外凸耳型 Retaining rings with lugs for use on shafts (external circlips)
DIN 983
• 轴用钢丝挡圈及挡圈槽 Round wire snap rings and snap ring grooves for shafts and bores
DIN 7993
• 轴用挡圈—标准型和重型 Circlips (retaining rings)for shafts - Normal type and heavy type
DIN 471
• 孔用挡圈—带内凸耳型 Spring retaining rings with lugs for use in bores (internal circlips)
DIN 984
• Circlips(retaining rings)for shafts
DIN 471
• Circlips(retaining rings)for bores
DIN 472
• Retaining rings with lugs
DIN 983
• Spring retaining rings with lugs
DIN 984
• Lock washers
DIN 6799
• Round wire snap rings and snap ring grooves. For shafts bores
DIN 7993
销及键
• 弹性圆柱销—开槽—轻型 Spring-type straight pins,slotted,light duty
DIN EN ISO 13337 | 代替DIN 7346
• 重型传动连接楔形键—斜键和键槽型式及尺寸 Stressed-type fastenings with taper action-Taper keys keyways-Dimensions and application
DIN 6886
• 半圆键和键槽型式及尺寸 Drive-type fastenings without taper action-Woodruff keys-Dimensions and application
DIN 6888
• 弹性圆柱销—开槽—重型 Spring-type straight pins,slotted,heavy duty
DIN EN ISO 8752 | 代替DIN 1481
• 机床用平键—传动连接—键和键槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,keyways,deep pattern for machine tools-Dimensions and application
DIN 6885-2
• 薄型平键—传动连接—键和键槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,shallow action-Dimensions and application
DIN 6885-3
• 弹性开口销 Spring cotters
DIN 11024
• 开口销 Split pins
DIN EN ISO 1234 | 代替DIN 94
• 腰型头轴肩销轴 Clevis pins with head and stud end
DIN 1445
• 圆柱销 Clevis pins without head
DIN EN 22340 | 代替DIN 1443
• 销轴 Clevis pins with head
DIN EN 22341 | 代替DIN 1444
• 弯头楔键和键槽型式及尺寸 Taper key torque transmission-Gib-head saddle keys-Dimensions and application
DIN 6889
• 交变载荷用楔键和楔键槽 Tangential keys and tangential keyways for alternating shock loads
DIN 268
• 单一载荷用楔键和楔键槽 Tangential keys and tangential keyways for constant loads
DIN 271
• 平键用钢一型式、尺寸、重量及允许偏差 Bright key steel-Dimensions,permissible variations,weights
DIN 6880
• 鞍形楔键—扭矩传输—尺寸及安装连接要求 Taper key torque transmission-Saddle keys-Dimensions and application
DIN 6881
• 楔键—扭矩传输—尺寸及安装连接要求 Taper key torque transmission-Parallel keys-Dimensions and application
DIN 6883
• 弯头楔键—扭矩传输—尺寸及安装连接要求 Taper key torque transmission-Gib-head parallel keys-Dimensions and application
DIN 6884
• 平键—传动连接—键和键槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,keyways,deep pattern
DIN 6885-1
• 外螺纹圆锥销 Taper pins with thread ends and constant taper lengths
DIN 258
• 槽销 Grooved pins,half - length grooved,with gorge
DIN 1469
• 固定销 Rivet pins
DIN 7341
• 圆锥销—内螺纹 Unhardened taper pins
DIN EN 22339 | 代替DIN 1
• 内螺纹圆锥销—不淬硬 Unhardened taper pins with internal thread
DIN EN 28736 | 代替DIN 7978
• 外螺纹圆锥销—不淬硬 Unhardened taper pins with external thread
DIN EN 28737 | 代替DIN 7977
• 圆柱销—不淬硬钢和奥氏体不锈钢 Parallel pins,of unhardened steel and austenitic stainless steel
DIN EN ISO 2338 | 代替DIN 7
• 内螺纹圆柱销—不淬硬钢和奥氏体不锈钢 Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel
DIN EN ISO 8733 | 代替DIN 7979
• 圆柱销－淬硬钢和马氏体不锈钢（定位销） Parallel pins,of hardened steel or martensitic stainless steel(Dowel pins)
DIN EN ISO 8734 | 代替DIN 6325
• 内螺纹圆柱销－淬硬钢和马氏体不锈钢 Parallel pins with internal thread,of hardened steel and martensitic stainless steel
DIN EN ISO 8735 | 代替DIN 7979
• 槽销—带导杆及全长平行沟槽 Grooved pins,full - length parallel grooved,with pilot
DIN EN ISO 8739 | 代替DIN 1470
• 槽销—带倒角及全长平行沟槽 Grooved pins,full - length parallel grooved,with chamfer
DIN EN ISO 8740 | 代替DIN 1473
• 槽销—半长倒锥槽 Grooved pins,half - length reverse - taper grooved
DIN EN ISO 8741 | 代替DIN 1474
• 槽销—中部槽长为1/3全长 Grooved pins,one - third -length centre grooved
DIN EN ISO 8742 | 代替DIN 1475
• 槽销—中部槽长为1/2全长 Grooved pins,half-length centre grooved
DIN EN ISO 8743
• 槽销—全长锥槽 Grooved pins,full-length taper grooved
DIN EN ISO 8744 | 代替DIN 1471
• 槽销—半长锥槽 Grooved pins,half-length taper grooved
DIN EN ISO 8745 | 代替DIN 1472
• 圆头槽销 Grooved pins with round head
DIN EN ISO 8746 | 代替DIN 1476
• 沉头槽销 Grooved pins with countersunk head
DIN EN ISO 8747 | 代替DIN 1477
• 弹性圆柱销—卷制—重型 Spring-type straight pins,coiled,heavy duty
DIN EN ISO 8748 | 代替DIN 7344
• 弹性圆柱销—卷制—标准型 Spring-type straight pins,coiled,standard duty
DIN EN ISO 8750 | 代替DIN 7343
• 弹性圆柱销卷制轻型 Spring-type straight pins,coiled,light duty
DIN EN ISO 8751
• 重型传动连接楔形键—弯头斜键和键槽型式及尺寸 Stressed-type fastenings with taper action-Taper keys with gib heads,keyways-Dimensions and application
DIN 6887
• Taper Pins
DIN 258
• Tangential keys and Tangential keyways .for Alternating shock loads
DIN 268
• Tangential Keys and Tangential Keyways .for Constant loads
DIN 271
• Steel countersunk head rivets
DIN 302
• Moulding nails
DIN 1163
• Grooved pins,Half Length Grooved with Gorge
DIN 1469
• Rivet sets
DIN 6434
• Bright key steel
DIN 6880
• Taper key torque transmission
DIN 6881
• Taper key torque Transmission
DIN 6883
• Drive Type Fastenings without Taper Action
DIN 6885
• Stressed-type Fastenins with Taper Action
DIN 6886
• Stressed-type fastenings with taper action
DIN 6887
• Drive type fastenings without taper action
DIN 6888
• Taper key torque transmission
DIN 6889
• Spring Cotters
DIN 11024
• Unhardened taper pins
DIN EN 22339
• Clevis pins without head
DIN EN 22340
• Clevis pins with head
DIN EN 22341
• Unhardened taper pins with internal thread
DIN EN 28736
• Unhardened taper pins with external thread
DIN EN 28737
• Plain washers for use with clevis pins(product grade A)
DIN EN 28738
• Determination of shear strength of pins
DIN EN 28739
• Split pins
DIN EN ISO 1234
• Parallel pins,of unhardened steel and austenitic stainless steel
DIN EN ISO 2338
• Parallel pins,of hardened steel or martensitic stainless steel(dowel pins)
DIN EN ISO 8734
• Parallel pins with internal thread,of unhardened steel and austenitic stainless steel
DIN EN ISO 8733
• Parallel pins with internal thread,of hardened steel and martensitic stainless steel
DIN EN ISO 8735
• Grooved pins,full-length parallel grooved,with pilot
DIN EN ISO 8739
• Grooved pins,full-length parallel grooved,with chamfer
DIN EN ISO 8740
• Grooved pins,full-length reverse-taper grooved
DIN EN ISO 8741
• Grooved pins,one-third-length centre grooved
DIN EN ISO 8742
• Grooved pins,half-length centre grooved
DIN EN ISO 8743
• Grooved pins,full-length taper grooved
DIN EN ISO 8744
• Grooved pins,half-length taper grooved
DIN EN ISO 8745
• Grooved pins,with round head
DIN EN ISO 8746
• Spring-type straight pins,coiled,heavy duty
DIN EN ISO 8748
• Spring-type straight pins,coiled,standard duty
DIN EN ISO 8750
• Spring-type straight pins,coiled,light duty
DIN EN ISO 8751
• Spring-type straight pins,slotted,heavy duty
DIN EN ISO 8752
• Spring-type straight pins,slotted,light duty
DIN EN ISO 13337
• Closed end blind rivets with break pull mandrel and proruding head-AI/A|A
DIN EN ISO 15975
• Closed end blind rivets with break pull mandrel and proruding head-ST/ST
DIN EN ISO 15976
• Open end blind rivets with bread pull mandrel and protruding head-A|A/ST
DIN EN ISO 15977
• Open end blind rivets with bread pull mandrel and protruding head-A|A/ST
DIN EN ISO 15978
• Open end blind rivets with bread pull mandrel and protruding head-ST/ST
DIN EN ISO 15979
• Open end blind rivets with bread pull mandrel and countersunk head-ST/ST
DIN EN ISO 15980
• Open end blind rivets with bread pull mandrel and countersunk head-A|A/A|A
DIN EN ISO 15981
• Open end blind rivets with bread pull mandrel and countersunk head-A|A/A|A
DIN EN ISO 15982
• Open end blind rivets with bread pull mandrel and countersunk head-A2/A2
DIN EN ISO 15983
• Open end blind rivets with bread pull mandrel and countersunk head-A2/A2
DIN EN ISO 15984
• Open end blind rivets with bread pull mandrel and protruding head-CU/ST or Cu/Bu or Cu/SSt
DIN EN ISO 16582
• Open end blind rivets with bread pull mandrel and countersunk head-CU/ST or Cu/Br or Cu/SSt
DIN EN ISO 16583
• Open end blind rivets with bread pull mandrel and protruking head-NiCu/St or NiCu/SSt
DIN EN ISO 16584
• Open end blind rivets with bread pull mandrel and protruking head-A2/SSt
DIN EN ISO 16585
• Turnbuckles made from steel tubes or round steel bars
DIN 1478
• Forged turnbuckles(open type)
DIN 1480
• Split pins
DIN EN ISO 1234
组合件和连接副
• 钢结构用—开槽沉头螺钉和六角螺母连接副 Steel slotted countersunk head screws for structural steel bolting for supply with hexagon nuts
DIN 7969
• 钢结构用—大六角头铰制孔高强度螺栓和六角螺母连接副 High-strength hexagon fit bolts with large widths across flats for structural steel bolting
DIN 7999
• 螺钉和波形弹性垫圈的组合件 Screw and washer assemblies - Coarse threaded screws with captive wave spring washer
DIN 6900-2
• 螺钉和鞍形弹性垫圈的组合件 Screw and washer assemblies - Coarse threaded screws with captive curved spring lock washer
DIN 6900-3
• 螺钉和锯齿形锁紧弹性垫圈的组合件 Screw and washer assemblies - Coarse threaded screws with captive serrated lock washer
DIN 6900-4
• 螺钉和锥形弹性垫圈的组合件 Screw and washer assemblies - Coarse threaded screws with captive conical spring washer
DIN 6900-5
• 螺钉和锥形弹性垫圈的组合件—垫圈硬度200HV 和300HV Screw and washer assemblies with plain washers-Washer hardness classes 200HV and 300HV
DIN EN ISO 10644
• 双头螺柱—旋入端长度≈2d Studs with a length of engagement equal to about 2d
DIN 835
• 双头螺柱—旋入端长度≈1d Studs with a length of engagement equal to about 1d
DIN 938
• 双头螺柱—旋入端长度≈1.25d Studs with a length of engagement equal to about 1,25d
DIN 939
• 双头螺柱—旋入端长度≈2.5d Studs with a length of engagement equal to about 2,5d
DIN 940
• 双头螺柱—旋入端长度≈2d—过盈配合螺纹（A型） Metric interference-fit thread studs with a length of engagement equal to about 2d(type A)
DIN 949-1
• 双头螺柱—旋入端长度≈2.5d—过盈配合螺纹（B型） Metric interference-fit thread studs with a length of engagement equal to about 2,5d(type B)
DIN 949-2
• 自攻螺钉和平垫圈组合件 Tapping screw and washer assemblies with plain washers
DIN EN ISO 10510
• Hexagon turnbuckles
DIN 1479
• Screw and washer assemblies
DIN 6900-5
• Screwed Ineerts(screw plugs)
DIN 7965
钉子
• 射钉 Round plain head nails for use in automatic nailing machines
DIN 1143-1
• 木钉—用于刨花合成板 Nails for the installation of wood wool composite panels
DIN 1144
• 平头和沉头钢钉 Round plain head and countersunk head wire nails
DIN 1151
• 圆柱头钢钉 Round lost head wire nails
DIN 1152
• 钢钉—用于装饰 Decorator's tacks
DIN 1157
• 墙弯钉 Wall hooks
DIN 1158
• 大头和石板瓦钉 Clout or slate nails
DIN 1160
• 模用长钉 Moulding nails
DIN 1163
• 钢钉—用于石膏板固定 Accessories for the installation of gypsum plasterboard-Nails
DIN 18182-4
• 钢钉—用于木托盘固定 Nails for assembling timber pallets
DIN 68163
• Round plain head nails
DIN 1143
• Decorator's tacks
DIN 1157
• Wall hooks
DIN 1158
• Accessories. For the installation of gypsum plasterboard
DIN 18182
• Nails for assembling timber pallets
DIN 68163
• Steel wire nails
DIN EN 10230-1